Kontakt

Za Vas smo dostupni od ponedeljka do petka od 8:00 do 17:00 časova. Preko ovog linka možete pronaći kontakt osobe za Vaš region.

Sedište u Wolfurtu
+43 5574 6706-0

Vaše kontakt osobe

SHOP

Korpa {{ (warenkorbCtrl.warenkorb.bestellNummer ? (' [' + warenkorbCtrl.warenkorb.bestellNummer + '] ') : '' )}} | {{warenkorbCtrl.warenkorb.items.length}} Artikal Izmena pregleda korpe

Primedba

Slika

Artikal

kom.

Cena za jedan komad

Ukupna cena

Ukupna cena uklj. popust

{{warenkorbItem.bezeichnung | artikelBezFilter:warenkorbItem.attributwertEingaben:[{attrPrefix: 'L_', searchPattern: '/...', replacePrefix: '/', replaceSuffix: ''}] }} {{warenkorbItem.bezeichnung | artikelBezFilter:warenkorbItem.attributwertEingaben}}

{{attributwertEingabe.attributBezeichnung}}

{{hannexItem.Bezeichnung}}

: Prijavite se da biste videli svoje cene i nastavili da naručujete.

Sredstvo za učvšćivanje, visoka čvrstoća i srednja viskoznost

VBA 6M48

Opis proizvoda

High strength, anaerobic one-part adhesive for glueing in metallic bushes and bearings that are subject to high stress. The adhesive is solvent-free, heat resistant and resistant to chemicals. After the setting process is completed, it forms a high strength bond in the gap ensuring that the components - even if they are from passive materials - are permanently fixed.

Prednosti

Permanent bond that can be removed only when subject to high temperatures
For threads up to M20 and gaps up to 0.15 mm
High resistance to chemicals
Vibration and impact resistant
Can be used on passive materials

Preuzmite E bezbednosni list pored odgovarajućeg proizvoda na www.meusburger.com

Izbor proizvoda

Informacije o proizvodima

Preporuke za proizvod

Izbor proizvoda

Pakovanje	Sadržaj	Kom. / pakovanju pce.	Br.	Cena / komad
Flaša	50ml	1	VBA 6M48/ 1/ 50	41,00 €
Flaša	50ml	6	VBA 6M48/ 6/ 50	205,00 €
Flaša	50ml	12	VBA 6M48/12/ 50	410,00 €

Informacije o proizvodima

Karakteristike

VBA 6M48	Cena	Metode ispitivanja
Boja	zelen	DIN ISO 2049
Maksimalna temperatura	175 °C
Baza	dimethacrylate ester
Density	1,1 g/cm³	DIN EN 524
Maximum gap	0,15 mm
Curing time for full strength	6 h	at room temperature, on steel
Residual torque	60 Nm	DIN EN 15865
Curing time for functional strength	1-2 h	at room temperature, on steel
Maximum thread diameter	M20
Curing time for fixture	1-7 min	at room temperature, on steel
Strength	high strength
Breakaway torque	48 Nm	DIN EN 15865 (without preload)
Compression shear strength	34 N/mm²	DIN EN 15337
Viscosity	500 mPas	Brookfield (25 °C)